For 32" – 80" flat-panel TVs

  • Type Tilting
  • Fits TVs 32" - 80"
  • Max Weight 130lbs
  • Depth 1.95"
  • Tilting 5° / -10°

PLA50 Discontinued

$59.98 USD

Hover over the large image to zoom

For 32" – 80" flat-panel TVs

  • Type Tilting
  • Fits TVs 32" - 80"
  • Max Weight 130lbs
  • Depth 1.95"
  • Tilting 5° / -10°

PLA50 Discontinued

$59.98 USD

This product has been discontinued.

PLA50 is rated 3.5 out of 5 by 2.
  • y_2019, m_9, d_21, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_pla50, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sanus
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 20.02ms
  • REVIEWS, PRODUCT

The SANUS Accents PLA50 is a tilting wall mount for 32" – 80" flat-panel TVs up to 130 lbs. Reduce glare and find the perfect viewing angle with Virtual Axis™ technology, which allows effortless tilt motion with the touch of a finger. Flush design allows the PLA50 to sit just 1.95" from the wall to maximize the sleek, thin look of the TV. Powder-coated heavy-gauge steel construction provides strength and durability. TV brackets can slide left or right on the wall plate after mounting to ensure it is perfectly positioned, even with off-center wall studs. Convenient quick-release straps on the mounting brackets stay hidden but easily pull down to unlock the TV from the wall plate for cable access. Includes a 5 year warranty.

Will this work with my TV?

Enter the model number of your TV to find out.

Here are a few products that are compatible with your TV!

    Ready to install your Mount?

    Use the HeightFinder for mounting instructions. Go to HeightFinder

    Product Features

    1. Easily adjust your TV without tools
    2. Hardware included
    3. Leveling adjustments allow TV to be perfectly positioned after hanging
    4. Our TV Mount products are Safety Tested and UL Certified
    5. Pull down on hidden straps to access cables behind your TV
    6. Slide TV side-to-side for perfect positioning on the wall

    Take A Look At These Specs

    Product Brand: SANUS Accents
    Model Code: PLA50
    UPC Code: 793795521255 - Black - Discontinued
    Product Width: 27.64" / 70.21cm
    Product Height: 16.93" / 43.00cm
    Product Depth: 1.95" / 4.95cm
    Product Weight: 15.00lbs / 6.80kg
    Package Width: 32.38" / 82.25cm
    Package Height: 4.13" / 10.49cm
    Package Depth: 8.50" / 21.59cm
    Package Weight: 14.30lbs / 6.49kg
    TV Size Range: 32" - 80" / 81.28cm - 203.20cm
    Maximum TV Weight: 130lbs / 58.97kg
    Supported VESA Patterns
    Tilt: / -10°

    Supported VESA Patterns

    • VESA 100 x 100
    • VESA 200 x 100
    • VESA 200 x 200
    • VESA 300 x 200
    • VESA 300 x 300
    • VESA 400 x 300
    • VESA 400 x 400
    • VESA 600 x 400

    Tools You Will Need For Installation

    • 7/32" Drill Bit
    • 3/8" Masonry Bit (Concrete Installations)
    • 1/2" Socket Wrench
    • Awl
    • Electric Drill
    • Hammer
    • Level
    • Pencil
    • Phillips Head Screwdriver
    • Stud Finder
    • Tape Measure
    Rated 5 out of 5 by from Standard Sanus Wall Mount I've had three tilting Sanus wall mounts including this one. The first two were very expensive ($130 each) and purchased from major appliance stores. This one was the "Accent" model from Target. It is a bit lighter weight, same wall plate, and significantly easier to install with the auto-latch on the bottom that snaps into place. All of that for half the price of the original tilting mounts. All three of the Sanus mounts I've used had the same screw kits and spacers (including this Accent version). I've used them on a Samsung Plasma 50", Sharp LCD 52", and now LG OLED 65" TV. No issues on any of them. This model sits very close the wall (good look, but no space to reach behind the TV). Plug all of your cords in before hanging the TV or you won't be able to hook it up.
    Date published: 2018-07-02
    Rated 2 out of 5 by from Screws don't fit As others noted here, the supplied screws were too short or too long. I used a coping saw and cut the spacers and made them work. Now, trying to mount, and on the SANUS height finder, it does not list this mount model in the SANUS site. Not impressed.
    Date published: 2018-05-02
    • y_2019, m_9, d_21, h_19
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_2
    • loc_en_US, sid_pla50, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_sanus
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getReviews, 55.14ms
    • REVIEWS, PRODUCT
    comments powered by Disqus